OZCON - Water Harvesting

OZCON offers a full TurnKey solution. Our services include: Excavating Installation of water storage system Filtration of captured water Connection to an existing or new irrigation system Connection to an existing or new storm water drain Engineering services if needed Please contact us to discuss your next project. Below are some of the products OZCON use. The Atlantis Matrix System, CUDO Cube and RAINSTORE3 by Invisible Structures water storagesystem. Each product has their own unique advantages depending on the customer needs and site layout.
The Atlantis Matrix Tank Modules are suited to any subsurface infiltration or retention applications. Manufactured using recycled materials, the Matrix Tank Module is a lightweight structural component. It is ideal for the construction of infiltration tanks and water re-use tanks. The subsurface location and the high compressive strength on the modules provides greater useable ground area and enhanced aesthetic setting compared to traditional above ground tanks. The lightweight, modular design of the Flo-Tank tank system makes installation quicker, safer, easier and cheaper than below ground round or oval concrete or plastic tanks. The Infiltration Tank System is the ideal way to manage stormwater runoff in permeable or semi permeable soil conditions. The system is designed to capture water, and then clean and filter the water before it is allowed to recharge the water table providing moisture for surrounding vegetation. The Atlantis system provides a void space of over 90% consequently the Atlantis system offers a smaller footprint to achieve the same storage capacity as other products.This saves time and money in installation and civil works costs. The lightweight design of the Atlantis Ecological Tanks also makes installation safer and cheaper. The Atlantis Tank System emulates the natural water cycle and delivers clean water to aquifers and waterways protecting terrestrial and aquatic eco systems for current and future generations.Potential LEED points can be obtained depending on the project.


CUDO is a modular plastic cube that can be installed as a single-level underground system or connected vertically to create water storage solutions with virtually unlimited size, shape and capacity. It incorporates an arched design that adds structural integrity, increased water storage and enhanced access for inspection and maintenance. Filter devices and pumps can be incorporated into the CUDO system for even higher efficiency and site-specific solutions. Because of its versatility and structural integrity, the land above the CUDO Cubes can be used for multiple things such as car parks, gardens, driveways etc. CUDO Cubes can be stacked up to 4 cubes high and can have a coverage of up to 8 ft over the top of them, which means some trees or even vineyards can be planted over the top of it without disturbing the CUDO system. Because of its versatility, you don’t have the wasteful space and unsightly looks of an above ground system. CUDO is also made from recycled plastics and is 100% made in the USA. You can assemble CUDO Cubes to build a water storage, detention or retention system with virtually unlimited sizes and shapes. CUDO dimensions (2 ft. x 2 ft.) make it easy to install by hand, 95% void ratio allows for a reduced footprint. CUDO components allow the construction of systems with features and benefits not possible with any other water management product. CUDO cubes can also add LEED points to any development.

One RAINSTORE3 unit measures 3.28 ft x 3.28 ft x 4 inches high. The void space of each Rainstore3 unit is 94% which can hold as much as 25 gallons. The RAINSTORE3 units can be used in a variety of heights, from 4 inches through to just under 8 ft. RAINSTORE3 can be used for water harvesting, water retention and detention and storm water management . RAINSTORE3 is structurally rated and can be used under car parks as well. It has been tested to an H-20 load capacity.